Table of Contents
Advertisement
Default NAT mode system configuration
When the DFL-1000 is first powered up or when it is reset to default, the system has the following
standard configuration:
•
Operation Mode: Network Address Translation
•
Internal Address: 192.168.1.99, mask 255.255.255.0
•
External Address: 192.168.100.99, mask 255.255.255.0
•
DMZ Address: 10.10.10.1, mask 255.255.255.0
•
Administrator Name: admin, Password: blank
•
Idle Time-out: 5 minutes
•
External administration: blocked
•
Internal administration: enabled
•
DMZ administration: blocked
•
Internal and external ping: enabled
•
DHCP server: disabled
•
High Availability: disabled
•
SNMP: disabled
•
All outgoing traffic: allowed
•
All incoming traffic: blocked
•
Internal Address: Internal-all
•
External Address: External-all
•
DMZ Address: none
•
One-time schedule: none
•
Recurring schedule: Always
•
Anti-virus for HTTP: Low
•
Anti-virus for POP3, SMTP, and IMAP: Low
•
Worm protection: Disabled
Default Transparent mode system configuration
When the DFL-1000 is first switched to transparent mode or when it is reset to default and run in
Transparent mode, the system has the following standard configuration:
•
DMZ Address: 10.10.10.1, mask 255.255.255.0
•
Administrator Name: admin, Password: blank
•
Idle Time-out: 5 minutes
•
Management/DMZ address: 10.10.10.1
•
Management/DMZ administration: enabled
•
Management/DMZ ping: enabled
•
SNMP: disabled
•
All outgoing traffic: allowed
•
All incoming traffic: blocked
•
Internal Address: Internal-all
•
External Address: External-all
•
DMZ Address: none
•
One-time schedule: none
DFL-1000 User's Manual
94
Advertisement
Table of Contents
