This Publication - Gen Set MPM 6/230 S-L Use And Maintenance Manual

GB
01.4 USING THIS MANUAL
"Symbols" are used along with text to highlight and point
out visually the relevance of different types of information.
Graphic representation of symbols and their meaning:
Points out to important complementary information.
The non-observance of associated directions can cause
damage, even irreparable, to the power generator.
Points out to possible situations dangerous for people.
This manual, together with appendices and any inclusions,
must be kept with the utmost care and always be
unabridged, undamaged and readable in its entirety.
If lost, a copy must be promptly requested to the
manufacturer.
WELDING PROCESS: LEGEND
Shielded metal arc welding (SMAW).
Gas tungsten arc welding (GTAW) Lift Start only.
Gas metal arc welding (GMAW).
01.5 TERMINOLOGY
Explanation of some of the terms relating to the power
generator and used in this publication.
: the part of the unit where the control panel is located.
FRONT
MPM 6/230 S-L
6
MI-M-00006200
01. REFERENCE GUIDE
: the opposite part.
BACK
: referred to an operator standing in
RIGHT OR LEFT SIDE
front of the unit and looking at the control panel.
01.6 ABBREVIATIONS
A ampere
V volt
ca alternate current
cc direct current
3F + N three phase plus neutral
Ah ampere / hour
Hz hertz
hp horsepower (1hp = 0,736 kW)
cos power factor
kW kilowatt
kWm kilowatt motor
kVA kilovolt ampere
kg kilogram
l litre
l/h litre / hour
mm millimetre
m metre
s second
°C degree Celsius
L sound power level
WA
Lp sound pressure
dB(A) decibel