Gen Set MPM 6/230 S-L Use And Maintenance Manual page 38

GB
pic.1
Engine oil grade table
MPM 6/230 S-L
38
MI-M-00006200
09. MACHINE MAINTENANCE
1
2
3
Changing engine oil (picture 2)
For the substitution to proceed like it follows:
• Remove the plate (4).
• Place a container under the machine
• Remove the oil drain cap (5).
• Allow to drain the oil when the engine is hot. The hot oil is
discharged quickly and completely.
Caution hot oil may cause burns, always use
protective gloves.
Always use the best gradient oil and clean.
The use of contaminated or bad oil quality and
insufficient quantity of oil can cause engine
damage or shorten the durability.
The waste oil must be collected in a suitable
container and delivered to centres of
authorized collection. Refer to the regulations
and laws in force in your country regarding
the disposal of hazardous waste.
Replace and tighten the oil drain plug (5). Supply of new
oil, choose the oil viscosity according to the ambient
temperature (for other temperatures check the
oil grade table"
). Introduce new oil through the cap (6).
Wait at least five minutes, then check the oil level again.
It is important that the unit is sitting on level ground.
pic.2
7
6
5
4
"Engine