Gen Set MPM 6/230 S-L Use And Maintenance Manual page 34

GB
08.1 PACKING, TRANSPORTING AND STORING
THE UNIT
Packaging
The package is provided by factory.
Disposing of packaging onto land is strictly
forbidden.
Transport (picture 1)
Do not overturn the generator (with or without packaging)
during transport.
The generator must be transported without fuel to avoid
any leakage.
The generator must be secured to the vehicle during
transportation.
In case of long term installation, secure the
generator using the anchor points provided
in its base (picture 2).
Storage
The generator unit must be stored in the horizontal position.
08.2 LIFTING AND MOVING THE UNIT
All lifting operations must be carried out by
qualified personnel, such as fork lift operators,
crane operators and slingers. The operator
should be deemed responsible for using the
correct method of slinging and lifting the
generator unit.
Lifting and moving
The generator must be lifted and moved as indicated in
pictures 3 and 4. Make sure that lift ropes or chains are
approved and of sufficient capacity. Always use the lifting
eyes provided by the manufacturer as indicated. Use a fork
lift of proper capacity, fitted with wide forks, and lift the
unit as illustrated (picture 4).
Never leave the load insecure.
Lay the generator on the ground gently.
When lifting and moving the generator, do not
stay or walk within it's proximity.
Never leave the generator slung overhead
When moving and transporting the generator,
do not tilt it excessively.
MPM 6/230 S-L
34
MI-M-00006200
08. MOVING THE MACHINE
Bottom view (dimensions in mm)
.
pic.1
pic.2
560
pic.3