Quick Start
H3C S5100-SI/EI Series Ethernet Switches
Caution:
When installing or removing an optional interface module, pay
attention to the following points:
Do not use too much force in the operation, and do not touch the
surface-mounted components directly with your hands.
After removing an optional module, if no new module is to be
installed, install the filler panel as soon as possible to prevent dust
and ensure the normal ventilation in the switch.
3.7.2 Stack Module
I. Appearance and front panel
Figure 3-33 Appearance of a stack module
Chapter 3 Installing the Switch
3-38