Installing And Removing Optional Interface Modules; Xfp Interface Module - H3C S5100-SI series Quick Start Manual

Quick Start
H3C S5100-SI/EI Series Ethernet Switches
3.7 Installing and Removing Optional
Interface Modules

3.7.1 XFP Interface Module

I. Appearance and front panel
Figure 3-30 Appearance of an XFP interface module
Figure 3-31 Front panel of an XFP interface module
II. Installation
Step 1: Put on an ESD-preventive wrist strap and verify the
ESD-preventive wrist strap properly grounded. Then take out the XFP
interface module from the package.
Chapter 3 Installing the Switch
3-35