Use Front Mounting Ears And A Tray - H3C S5100-SI series Quick Start Manual

Quick Start
H3C S5100-SI/EI Series Ethernet Switches
Figure 3-5 Mounting the switch with front mounting ears and a
tray
3.1.

4 Use Front Mounting Ears and a Tray

Follow these steps to install a sw
with fron mounting ears and a tray: t
1) Wear an ESD-preventive
and stability of the rack.
2) Fix the delivered tray horizontally in a proper position.
3) Take out the screws which are packed together with the
front mounting ears, and fix one
switch, as shown in Figure 3-4.
4) Place the switch on the tray horizontally, slide the tray into
the cabinet, and fix the other end of mounting ears to the
Front Front
mounting ear mounting ear
itch into a 19-inch standard rack
wrist strap to check the grounding
3-8
Chapter 3 Installing the Switch
Front square-holed bracket Front square-holed bracket
Front mounting ear Front mounting ear
Front panel Front panel
end of mounting ears to the