Panasonic mc-e7101 Service Manual page 8

MC-E7101 / MC-E7103
5.7. Replacing power switch
1. Remove the lead wires and hole cover from the connection
terminal (Faston terminal).
2. Disengage the hook of the switch button from the lib inside
the upper body, and remove the switch.
NOTE:Make sure the lead wires and lower body seal are
correctly positioned to avoid pinching them between parts.
5.8. Replacing power board
1. Look at inside the upper body.
2. Disconnect the lead wires from the switch terminals.
3. Remove the power board fastening screws (2 pieces), and
remove the power board from the upper body.
5.9. Replacing current fuse
1. Disconnect the screw connectors on both ends of the
current fuse, and replace the current fuse.
2. When reconnecting after repair, verify that they are securely
connected.
10