Panasonic mc-e7101 Service Manual page 7

5.6. Replacing cord reel
1. When the motor is removed from the lower body, straightly
pull up the cord reel from the lower body for removal.
2. Disconnect the lead wires from the connection terminals
(Faston terminals) of the cord reel on the body partition.
3. Pull up and remove the power supply cord cover of the
lower body, and disconnect the cord.
4. Pro-wind the cord reel ass'y 4 or 5 times in the direction of
the arrow (→) indicated on the cord reel cover.
5. With the brake lever section down, fit the cord reel ass'y
into the upper body.
6. After positioning the lead wrie between the motor and body
partition, couple the lower body.
*We will provide a cord reel for units for the UK market
together with a lower body unit as a set, because its plug is
big. (lower body unit)
9
MC-E7101 / MC-E7103