Panasonic mc-e7101 Service Manual page 6

MC-E7101 / MC-E7103
5.4. Removing upper body
1. Remove the mounting screw (1 piece), and remove the rear
cover retaining plate.
2. Lifting the handle at the rear area, and push it forward for
removal.
3. Reverse the main body of the cleaner upside down, and
remove the mounting screws (2 pieces) of the upper body
on the rear of the main body.
* Special screws are sometimes used.
(If a TORX screwdriver is not available, you can use a
narrow flat-blade screwdriver to remove it.)
4. Return the main body downside up, remove the mounting
screws (4 pieces) of the upper body, and remove the upper
body from the lower body.
5.5. Replacing motor
1. Straightly pull up the motor from the lower body for removal.
2. Disconnect Faston connection terminal from the motor.
3. Disassemble of Fan Motor unit.
Remove the front and rear motor support rubber and noise
suppressor, etc., and replace the motor.
4. Assembling
Take the revers order of removing procedure.
8