Receiving A Call - SoftBank 730SC Manual

Receiving a Call

a
Voice Call window appears,
t
To end the call, y
b
If Any key answer is On, press any key except
●
w, c, o, y, n and b to accept call.
To place caller on hold, press y. To connect
●
the call, press c (Accept).
To adjust ringer volume, press n or b.
●
If Stereo Earphone Microphone is connected, press
●
Stereo Earphone Microphone switch for 1+
seconds to accept Voice Calls. Press again for 1+
seconds to end the call.
Missed Call Window
●
Missed Call window appears for unanswered calls.
Press c (View) to view Received calls (fP.3-6).
Ringtone
●
Specify ringtones by Phonebook entry or Category
(fP.2-23, P.2-25). If not set, active Mode Setting
applies (fP.1-9).
In Security, if Secret mode is set to Hide when a
call from a Secret entry is received, active Mode
Setting applies.
Incoming Call Window
●
If a caller sends Caller ID, phone number appears.
If saved in Phonebook, name also appears. If caller
hides Caller ID, Withheld appears.
If incoming image has been saved in Phonebook or
for the group, image also appears (fP.2-23, P.2-
25).
In Security, if Secret mode is set to Hide when a
call from a Secret entry is received, only number
appears.
When you cannot answer a call
●
Use Call Forwarding or Voice Mail to handle calls.
While handset rings/vibrates, press w (Forward)
to forward call to Voice Mail or forwarding number
(fP.3-8, P.3-10). Alternatively, press c
(Record) to record caller message on 730SC
(fP.3-4).
Advanced
brP.3-14
s
Set Side Keys to activate Reject Call or mute ringer
●
(rP.10-11)
Set Any key answer (rP.10-11)
●
Accept or reject calls from specified phone numbers
●
(rP.10-14)
Create or edit Black List (rP.10-15)
●
Accept or reject calls from unknown numbers
●
(rP.10-15)
Accept or reject calls when number is withheld
●
(rP.10-15)
Accept or reject calls from payphones (rP.10-15)
●
Accept or reject calls when number is unavailable
●
(rP.10-15)
3
3-3