SoftBank 730SC Manual page 25

c
When battery is charged,
disconnect handset, close
Port Cover and unplug AC
Charger
Port Cover
USB Charging
Connect 730SC to a PC via USB Cable (optional) to
charge battery.
a
Open Port Cover and insert
USB Cable Connector into
Charger Port
b
Insert USB Plug into a PC USB
port
c
When battery is charged,
disconnect handset, close
Port Cover and remove USB
Plug
USB Charging takes longer; charging time
●
varies by PC. A weak battery may not charge
via USB.
If handset is off when initially connected to a PC,
●
power on handset to begin charging battery.
If install driver prompt appears upon USB
●
connection, follow one of these steps:
- Select Cancel
- Remove USB Plug from PC → Open
http://jp.samsungmobile.com/pc/support/
download.html → Select 730SC → Download
driver via USB Driver Installer
To install driver, open the downloaded file and
execute Setup.exe → Insert USB Plug into PC.
Battery will charge without installing USB driver. If
driver is unnecessary, select Cancel above.
1
1-5