SoftBank 730SC Manual page 17

Handset Care
If handset is left with no battery or an exhausted one, data may be
●
altered/lost. SoftBank is not liable for any resulting damage.
Use handset between 5°C - 40°C. Avoid extreme temperatures/direct
●
sunlight.
Exposing the lens to direct sunlight may damage the color filter and
●
affect image color.
Do not drop or subject handset to shocks.
●
Clean handset with a dry, soft cloth. Using alcohol, thinner, etc. may
●
damage it.
Do not expose handset to rain, snow, or high humidity.
●
Never disassemble or modify handset.
●
Avoid scratching Display.
●
When using headphones, moderate the volume to avoid sound bleed.
●
Handset is not water-proof. Avoid exposure to liquids and high humidity.
●
- Keep handset away from precipitation.
- Cold air from air conditioning, etc. may condense causing corrosion.
- Avoid placing handset in damp places (Restrooms, bath/shower
rooms, etc.).
- On the beach, keep handset away from water and direct sunlight.
- Perspiration may get inside handset causing malfunction.
xvi
Heavy objects or excessive pressure should be avoided. This may cause
●
malfunction or injury.
- Do not sit down with handset in a back pocket.
- Do not place heavy objects on handset in a bag.
Insert only specified devices into Charger Port. Malfunction or damage
●
may result.
Always turn power off before removing battery. If battery is removed
●
while saving data or sending mail, data may be lost, changed or
destroyed.
Copyrights
Copyright laws protect sounds, images, computer programs, databases,
other materials for copyright holders. Duplicated material is limited to
private use only.
Use of materials beyond this limit or without permission of copyright
holders may constitute copyright infringement, and be subject to criminal
punishment. Comply with copyright laws when using images captured
with handset camera.
The software contained in 730SC is copy protected material; copyright,
moral right, and other related rights are protected by copyright laws. Do
not copy, modify, alter, disassemble, decompile, or reverse-engineer the
software, and do not separate it from hardware in whole or part.