Security Codes; Phone Password; Center Access Code - SoftBank 730SC Manual

System Sounds
1 Available items vary by mode. Volume level set in
System sounds applies to all Phone sounds.
Item
All Check/uncheck all items.
Sounds for confirmations/
Popup box alerts
warnings.
Sounds about once a minute
Minute minder
during calls.
Sounds before called phone
Call connect tone rings to notify the call is going
to be connected.
Call end tone Sounds when a call ends.
Sounds when the power is
Power on
turned on.
Sounds when power is turned
Power off
off.
Sounds for alarms/incoming
Alerts on call
transmissions during a call.
1-12
Advanced
s
Adjust volume (rP.10-8)
●
Set Ringtone for Voice Call (rP.10-8)
●
Description
Set ringtone other than Voice Call (rP.10-8)
●
Set ringtone duration other than Voice Call
●
(rP.10-8)
Set Vibration (rP.10-8, P.10-9)
●
Set Keypad tones (rP.10-8)
●
Set system sounds (rP.10-8, P.10-9)
●
Illuminate External Light for incoming transmissions
●
(rP.10-8, P.10-9)
Illuminate External Light for missed calls (rP.10-
●
8, P.10-9)
Set Answering Machine (rP.10-9)
●
Activate or cancel Offline mode (rP.10-15)
●
Activate or cancel automatic ringer reduction
●
(rP.10-15)
Change mode (rP.10-16)
●

Security Codes

Phone Password, Center Access Code and Network
Password are required are required to use 730SC.

Phone Password

The 4-digit number (9999 by default) is required to
operate/change some handset functions.
Entered Phone Password digits are represented with
●
If incorrect, an error message appears. Try again.
●
Phone Password can be changed on 730SC
●
(fP.8-2).

Center Access Code

4-digit number specified at subscription; required
to change service subscriptions or to operate
Optional Services from landlines.
.
*