Troubleshooting Acl; Acl Application Failure With An Error Message; Symptom; Solution - HP 5920 series Troubleshooting Manual

Troubleshooting ACL

This section provides troubleshooting information for common problems with ACLs.

ACL application failure with an error message

Symptom

The system fails to apply a packet filter or an ACL-based QoS policy to the hardware. It also displays the
"Reason: Not enough hardware resource" message.

Solution

To resolve the problem:
1. Execute the display qos-acl resource command, and then check the Remaining field for ACL
resources insufficiency.
If this field displays 0, the ACL hardware resources are exhausted.
2. To free hardware resources, delete unnecessary ACLs.
3. If the problem persists, contact HP Support.

ACL application failure without an error message

Symptom
The system applies a packet filter or an ACL-based QoS policy to the hardware. However, the ACL does
not take effect.
9