Programming The Radio; Codeplug Programming - Motorola MTH500 Basic Service Manual

Programming the Radio

1. Verify that the radio is turned off.
2. Run the Customer Programming Software (CPS) on your computer.
3. Press the "1" and "9" keys together and then the On/Off key for about 3 sec-
4. Click the Toolbar "Read Phone" icon. Refer to the CPS Application Window
Note: While reading is in progress, the radio screen displays the following data:

CodePlug Programming

1. On the menu bar, click "File" "Open".
2. Browse for the required Codeplug file and open the file.
3. The Codeplug window appears on the screen.
4. Click the Toolbar "Tools" and select "Write Entire Codeplug".
20
onds. Verify that no display appears on the LCD screen.
Screen in the CPS User Guide, Publication No. 68P02956C20. The setup
enters an initialization process that takes about 20 seconds. After that, a read-
ing process starts.
Appears at the
end of the process
A progress bar appear on the computer screen. After the reading process is
finished, the radio Codeplug screen appears.
PROGRAMMING THE RADIO: Programming the Radio
Diag. SW Ver. 01.01
HW ID Code: XXX
Flash: TE28F320C3BA
Command READ REQ.
--Done--
00:00:00
Elapsed Time
Indication