Gree GWH(07)RA-K3DNA1A/I Service Manual page 45

Removal Procedure
S e t p s
9.Remove cross flow fan and motor
1 Remove screws of step motor and then
remove the motor.
2 Remove 4 connection screws of motor clamp
and rear case. Then remove motor clamp.
3 Remove cross flow fan and motor.
4 Remove ring of bearing sub-assy.
5 Removal of connection screws connecting
cross flow fan to motor shaft. Then remove
the motor.
P o r c e d u e r
O-Gasket Sub-assy of Bearing
Ring of Bearing
Step Motor
Motor Clamp
Cross Flow Fan
Fan Motor
43