X850 User manual
EVENT
The wheelchair stops while
being driven.
The wheelchair can only be
driven at reduced speed.
Applies with an electric
seat lift.
The wheelchair cannot be
charged.
POSSIBLE CAUSE
Main fuse triggered.
Seat lift raised too high.
Main fuse switched to OFF
position after, for example,
battery replacement.
Charging fuse triggered, for
example on account of
a fault in the batteries,
charger, charging cables or
charging socket.
69
Troubleshooting
REMEDY
See page 64.
Lower the seat lift.
See page 32.
Reset the main fuse.
See page 64.
Check possible causes carefully
before changing the charging
fuse.
See page 65.