Permobil x850 Owner's Manual page 38

X850 User manual
Controlling the functions of the Seat
Control Panel
To control the functions of the extra Seat
Control Panel, step forwards to the battery
voltage indicator. The first four LEDs there,
3 red and one yellow, are used to indicate
the functions of the Seat Control Panel.
The first LED corresponds to the left key of
the Seat Control Panel. The second LED
corresponds to the second key from left,
etc. The function is activated by moving the
joystick either forwards or backwards.
Your wheelchair does not need to be fitted
with an extra Seat Control Panel for you to
use the corresponding functions in Joystick
menu.
Exiting Joystick menu
There are two ways of exiting Joystick
menu.
1. Go to the last menu position
Step forward to the position for controlling
the Seat Control Panel. Continue to move
the joystick to the right until all ten LEDs on
the battery voltage indicator light up; 3 red,
4 yellow and 3 green. The other indication
lamps on the control panel also light up now
and you can return to the drive position by
moving the joystick forwards. You can also
switch off the wheelchair by moving the joy-
stick backwards and holding it in that posi-
tion for at least 3 seconds.
2. Activate the indicator function
Step forward to the indicator function and
activate the right or left indicators. Joystick
menu will then be exited and you return to
the drive position.
38
Design and function
Activation of the Seat
Control Panel
1. Exit Joystick menu
2. Exit Joystick menu