Seat Control Panel - Permobil x850 Owner's Manual

X850 User manual
Back angle (Corpus II only)
The back rest can be angled backwards as the user wishes. Press the upper
surface of the symbol to raise the back. Press the lower surface to lower the
back.
The back can be angled down to 130°.
Extension
The distance between the foot plate and the seat on the wheelchair is
adjustable. Press the upper surface of the symbol to move the foot plate out
and on the lower surface to retract it.
This makes it easy to set the leg length for the user and you have the chance
to stretch your legs while driving.
When the extension is fully extended, the wheelchair drives more softly out-
doors. When the extension is retracted, driving is easier indoors. More infor-
mation on page 46.
Make sure that there is nothing stuck between the chassis and the foot plate when
the length of the wheelchair is reduced. There is a risk of personal injury.
The seat rotation must not be used when the wheelchair is on a sloping surface.
There is a risk of personal injury.
Seat rotation
The seat rotation function allows you to rotate the seat. This makes it easier
to get into and out of the seat. Press on the upper surface of the symbol to
rotate the seat clockwise. Press on the lower surface of the symbol to rotate
the seat anticlockwise. The seat rotates until the position is straight forward
or the right or left end position.
When the seat rotation is activated, a lamp lights up above the seat lift sym-
bol on the control panel. Driving the wheelchair is prohibited when the seat
rotation is activated More information on page 46.
With the front wheels turned as far as they will go to the left or right, there is
more leg room, which makes seat rotation easier. Turn the front wheels as far
as they will go using the joystick. Hold the joystick in the desired position and
turn off the wheelchair using the main switch on the control panel. Then
switch the wheelchair on again without touching the joystick. Activate the seat
rotation. When the joystick is moved, the front wheels return to the neutral
position, i.e. straight forwards.
Seat Tilt (Corpus II only)
The seat angles backwards when you press the bottom part of the seat
title angle button and moves forward when the top part of the button is
pressed.
When the seat tilt is activated, the lamp above the seat lift button flas-
hes, this indicates that the seat lift cannot be used.
WARNING
35
Design and function