Turning Smart Functions On / Off; Controlling Network Cameras; Before Operation - Eizo DuraVision FDF2304W-IP Instruction Manual

3-4. Turning Smart Functions On / Off

Enable or disable settings of Smart Functions. Using Smart Functions improves the camera image
visibility.
Procedure
1. Press on the remote control.
Each time the button is pressed, Smart Functions are turned on or off.
Note
• For information on how to configure Smart Functions, refer to the Installation Manual.

3-5. Controlling Network Cameras

●

Before operation

Network camera control is allowed only when the level of the user accessing this product is
"CAMERA CONTROL" or "ADMIN".
Be sure to log in to the system with a user account of either of these levels.
Procedure
1. Select (Login) under "System".
The login screen is displayed.
2. Enter a username and a password.
3. Select "Login".
The display returns to the live image screen.
4. Press
The system frame is selected (highlighted in green).
Note
• For information on how to enter characters, refer to
• The following user information is set by default:
- Username: "admin"
- Password: "admin"
- User Level: "ADMIN"
• For information on how to configure users, refer to the Installation Manual.
• It is recommended that you log out after completing operations, so as to prevent a third party from operating
the camera or altering the settings.
Attention
• When the monitor power is turned off while the user is logged in, the user is logged out from the system
automatically. In such a case, you will also be logged out from the web browser.
14
Chapter 3 Operating the System
2
3
on the remote control.
1
"Entering characters" (page 11).