Maintenance; Specifications - Black & Decker BDSG500 Original Instructions Manual

ENGLISH

Maintenance

Keep guards, air vents and the motor
housing as clear as possible of dust and dirt.
Wipe with a clean cloth and blow through
with a low-pressure air supply. Excessive
build-up of metal dust can cause tracking of
electrical current from the internal parts to
exposed metal parts.
Warning! When servicing, use only identical
replacement parts. The use of any other
part may create a hazard or cause product
damage.
• DO NOT use solvents when cleaning
plastic parts. Plastics are susceptible to
damage from various types of
commercial solvents and may be
damaged by their use. Use a clean cloth
to remove dirt, dust, oil, grease etc.
Warning! Do not allow brake fl uids,
gasoline, petroleum-based products,
penetrating oils, etc. to come into contact
with plastic parts. They contain chemicals
that can damage, weaken or destroy plastic.
• Remove accumulated dust and debris
regularly using a SOFT and DRY brush.
Warning! Use safety goggles when using an
air jet to blow dust out of the tool. Keep air
vents clean and unobstructed to allow
maximum airfl ow through the tool.
• DO NOT abuse power tools. Abusive
practices can damage the tool and the
workpiece.
Warning! DO NOT attempt to modify tools
or create accessories. Any such alteration or
modifi cation is misuse and could result in a
hazardous condition leading to possible
serious injury. It will also void the warranty.
Lubrication
All of the bearings in this tool are lubricated
with a su cient amount of high-grade
lubricant for the life of the unit under
normal conditions. Therefore, no further
lubrication is required.
Cleaning
Use only mild soap and a slightly damp
cloth to clean your angle grinder. Many
10
(Original instructions)
Specifications
household cleaners contain chemicals which
could seriously damage the plastic. Also, do
not use petrol, turpentine, lacquer or paint
thinners or similar products. Never let any
liquid get inside the tool and never immerse
any part of the tool into liquid.
Important! To assure product SAFETY and
RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this
manual) should be performed by authorized
service centers or other qualifi ed service
personnel, always using identical
replacement parts.
Power
Voltage
TR voltage
No-load speed
Weight
Level of sound pressure according to EN 60745:
Sound pressure (L
uncertainty (K) 3 dB(A)
Sound power (L
uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum)
according to EN 60745:
Screwdriving without impact (a
uncertainty (K) 1.5 m/s
BDSG500
520W
230V ~ 50Hz
0 - 4500/min (rpm)
3.3lb (1,45kg)
) 82 dB(A),
pA
) 93 dB(A),
WA
) 3,5 m/s
h, s
2
2 ,