Table of Contents
Advertisement
Setup menus
<BASIC>
No./Item
000
For setting the preroll time.
Any time from 0 to 30 seconds can be set in 1-
P-ROLL TIME
second increments.
0000
:
0005
:
0030
30s
<Notes>
• During automatic editing (PREVIEW or AUTO EDIT),
no operations are performed if the preroll time is set
to 0 seconds.
• If the phases are to be synchronized between two
decks for editing as per the setup menu item No.004
(SYNCHRONIZE) setting, set the preroll time to at
least 2 seconds.
001
For selecting the transport system buttons
which can be operated on the front panel in
LOCAL ENA
the REMOTE mode.
0000
DIS:
0001
ST&EJ:
Only the STOP and EJECT buttons can be
operated.
0002
ENA:
All the buttons except for the RECORDER and
PLAYER buttons can be operated.
<Note>
The following buttons and dials function at all times
regardless of this setting:
Audio input/output level control dials, audio channel
selector buttons, number keys, function buttons, direct
menu button, ASSEM button, INSERT button, ADJ dial,
headphone volume control dial, MONITOR SELECT
button, METER (FULL/FINE) selector switch, REMOTE
button.
1
For selecting the 12- or 24-hour system for
002*
the CTL counter display.
0000
d d 12h:
TAPE TIMER
0001
24h:
003
For selecting whether or not to display REMAIN
(remaining tape time) on the superimposed
REMAIN SEL
display of the HD SDI MONITOR, SD SDI
MONITOR and VIDEO OUT3 connectors.
0000
OFF:
The remaining tape time is not displayed.
0001
2L:
The remaining tape time is displayed on the
second line.
0002
1L:
The remaining tape time is displayed on the
first line.
0003
R/TTL:
The remaining tape time is displayed on the
first line, and the total tape time is displayed on
the second line.
<Notes>
• When setting 1 (2L) has been selected, the remaining
tape time is not displayed if 0 (TIME) is selected as
the setup menu item No.006 (DISPLAY SEL) setting.
• When setting 3 (R/TTL) has been selected, the
remaining tape time is not displayed if 0 (TIME) is
selected as the setup menu item No.006 (DISPLAY
SEL) setting.
Description of setting
0s
:
5s
:
No buttons can be operated.
12-hour system display
24-hour system display
No./Item
1
For setting whether or not to synchronize the
004*
phases between two decks.
0000
OFF:
SYNCHRONIZE
The phases are not synchronized. The edit
points will be off by several frames but editing
will be commenced more promptly.
0001
ON:
The phases are synchronized.
editing can be performed.
005
For selecting whether or not to superimpose
the display of the time code or other data
SUPER
onto the HD SDI MONITOR, SD SDI MONITOR
and VIDEO OUT3 connectors.
0000
OFF:
The time code or other data is not displayed.
0001
ON:
The time code or other data is displayed.
006
For selecting the time code and other
displays to be superimposed onto the HD SDI
DISPLAY SEL
MONITOR, SD SDI MONITOR and VIDEO
OUT3 connectors.
0000
TIME:
Only the time is displayed.
0001
T&STA:
The time and operation mode are displayed.
0002 T&S&M:
The time, operation mode and mode are
displayed.
0003
T&RT:
The time and REC TIME are displayed.
0004 T&YMD:
The time and REC DATE (year/month/day) are
displayed.
0005 T&MDY:
The time and REC DATE (month/day/year) are
displayed.
0006 T&DMY:
The time and REC DATE (day/month/year) are
displayed.
0007
T&UB:
Data and user's bit are displayed.
However, when UB has been selected with the
F3
(TC/CTL) on the HOME menu, the time
code is displayed after the user's bit.
0008
T&CTL:
Data and CTL data are displayed.
However, when CTL has been selected with
the
F3
(TC/CTL) on the HOME menu, the time
code is displayed after the CTL data.
0009
T&T:
Data and time code are displayed.
*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or
SD) mode has been selected as the system menu item.
The underlining (__) denotes the factory setting mode.
Description of setting
Error-free
(See Notes on next page.)
81
Advertisement
Table of Contents
