Checking The Edit Points - Panasonic AJ-D750P Operating Instructions Manual

Checking the edit points

Calculating the duration
When both edit points have been set, the duration between the two edit points.
When only one edit point has been set, the duration between the set data and the current
tape address.
When neither edit point has been set, the duration of the previously edited interval.
Press the IN (or OUT) button to check the edit point.
The value of the entered edit point appears on the display.
Press the IN (or OUT) button while holding down the PREROLL button to check the
image at the edit point.
The tape is accessed at the edit IN (or OUT) point, and the still picture mode at that
point is displayed.
Press the IN and OUT buttons together to check the edit duration.
The duration time appears on the display.
2 1, 3
- 3 5 -