Audio V Fade Function - Panasonic AJ-D750P Operating Instructions Manual

Audio V Fade Function

When editing tapes, the edit point splicing selection (setting menu No. 309 and 310)
information is recorded on the tape. This information is then sensed during playback, and V
fade or cut processing is automatically performed for these sections. [However, only when
the playback fade selection (No. 719) is AUTO.]
When the edit point splicing selection (setting menu No. 309 and 310) is CUT
When the edit point splicing selection (setting menu No. 309 and 310) is FADE
<Notes>
When the playback fade selection (No. 719) is CUT, cut processing is performed for all
splices.
When the playback fade selection (No. 719) is FADE, V fade processing is performed for
all splices.
Audio signal A
Noise appears at the edit splice.
Audio signal A
V fade is performed instantaneously to eliminate the noise.
- 64 -
Audio signal B
Audio signal B