Panasonic AJ-D750P Operating Instructions Manual page 50

USER menu
<EDIT>
No.
306
307 EDIT
308 CONFI
309 AUD EDIT
310 AUD EDIT
311
312
313
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed
Superimposed
No.
display display
EDIT N-DEF
0000
RPLCE2
0001
0002
0003 CH1+2
N-DEF
0000
RPLCEC
0001
0002
0003 CH1+2
0000
EDIT
0001
0000
IN
0001
0000
OUT
0001
AUTO 0000
ENTRY
0001
0000 PLAYER
CF ADJ
RECORD
SEL
0001
AFTER
0000
CUE-UP
0001
- 50 -
This sets the channel assignments for the controller' s analog
audio preset when editing the digital audio of the VTR using a
CH1
controller which does not have a digital audio edit preset
CH2
control function.
This selects the channel concerned when the VTR CH2 edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
This sets the channel assignments for the controller' s analog
CH1
audio preset when editing the digital audio of the VTR using a
CH2
controller which does not have a digital audio edit preset
control function.
This selects the channel concerned when the VTR CUE edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the editor or
controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
OFF This selects whether to conduct simultaneous playback while
editing is in progress.
ON
0: No simultaneous playback
1: Simultaneous playback
<Note>
Simultaneous playback is valid when the TAPE/EE switch is
set to TAPE.
CUT This selects the connection method for the digital audio edit
IN point.
FADE
0: Cut processing
1: V Fade processing
CUT This selects the connection method for the digital audio edit
OUT point.
FADE
0: Cut processing
1: V Fade processing
DIS This selects whether the IN point is to be entered using the
PREROLL button when it has not been entered.
ENA
0: IN point is not entered.
1: IN point is entered.
This selects the CF adjustment deck with deck-to-deck
editing.
0: The player' s edit IN/OUT points are adjusted. (reference as
the RECORDER side)
1: The recorder' s edit IN/OUT points are adjusted. (reference
as the PLAYER side)
STOP This selects the mode after cue-up operation is complete.
0: STOP mode
STILL
1: SHTL STILL mode
Description