Tape Protect Menu - Panasonic AJ-D750P Operating Instructions Manual

Setup menus
USER menu
<TAPE PROTECT>
No.
400
401
The underline on the setting item denotes the initial setting.
<Note>
In order to protect the tape and VTR helical heads, it is recommended that the Still Timer be
set for automatic tape protection mode in 30 seconds or under.
Item Setting
Superimposed No. Superimposed
display
display
STILL 0000
TIMER 0001
0002
0003
0004
0005
0006
0007
0008
SRC 0000
PROTECT 0001
- 5 1 -
0.5s
This selects the time to be taken until the unit goes into the tape
protection mode when it is left standing in the stop or search still
5s
(JOG/VAR/SHTL) mode. (Unit: s = second, min = minute)
10s
20s
<Note>
30s
With the DV format, the maximum time which can be set is
40s
10s even when a setting above 10s has been selected. The
50s
selection screen, however, will operate for up to 2 minutes.
1 min
2min
STEP This selects the operation during the tape protection mode
when the unit is left standing in the still status during the
HALF
search mode (JOG/VAR/SHTL).
0: STEP FWD.
1: HALF LOADING.
<Note>
When STEP FWD is selected, the unit automatically goes into
the HALF LOADING mode when the total time for which the
unit is left standing in the still status reaches 30 minutes
(DVCPRO) or 1 minute (DV).
Description