Contents Introduction Contents of delivery Before use Installation Indications of symbols Operation of the device Troubleshooting guide Warranty conditions Safety instructions...
Genano 4500 ® Medical Air Purification Device Decontaminated air out Genano 4500 is an air purification device based on Genano Technology . The unique ® technology removes even the smallest impurities from indoor air. These impurities can consist of viruses, bacteria, mould spores as well as traffic originated soot.
Contents of delivery 1 Genano 4500 unit with mains power cable Contains 1 gas absorption plate to handle gas emissions. Make sure absorption plate is changed annually. The absorption plate change and other service measures are included in the service agreement.
Move the unit carefully over doorsteps and over obstacles by tilting. Genano 4500 takes in the contaminated air from the bottom. The purified air is let out through the upper part of the unit.
Page 6
NOTE! It is recommended to leave the unit on at all times, including times when no one is in the room, nights and weekends. Genano experts will help you with questions regarding indoor air quality and placement of the unit and fan settings. Follow the instructions given by your Genano expert to ensure the best possible outcome.
NOTE! Genonex washing liquid is ready for use without addition of water. Make sure that the main switch (see G on page 8) is in the OFF-position. Plug the main power cable into the Genano 4500 before you plug in the main cable into a grounded power socket (230V / 50Hz).
Indications of symbols The bottom basin can be locked. Inside it, there is a bowl for flush water and a container for the washing liquid. SIGNAL LIGHTS OPERATION SWITCHES A. OK F. MAIN SWITCH (ON/OFF) Green light ON (I) or OFF (0) B.
Operation of the device NORMAL OPERATION The unit is functioning and purifying air when the green OK light (A) is illuminated. The unit efficiently collects atmospheric particles on the collection surfaces inside the unit. Washing of the collection surfaces takes place automatically once a week.
Page 10
ERROR/SERVICE Genano 4500 has an internal monitoring system. This feature protects the unit and increases the drying period if parts are too wet after the washing. It is comple- tely normal that the drying period is increased due to the monitoring.
Page 11
GAS ABSORPTION PLATE Besides particles, the Genano unit can also remove gases. Using a gas absorp- tion plate, different kinds of gases can be removed from indoor air. The typical exchange period of the gas absorption plate is 12 months.
Contact authorized Genano service. AIRFLOW THROUGH THE DEVICE IS POOR OR IT SMELLS OF METALLIC GASES. • Turn device off and contact authorized Genano service. WARNING! Repairs and maintenance work must be carried out by authorised Genano service personnel only.
4. ADDITIONAL Additional warranties, commitments or assurances potentially given by the distri- butor or reseller bind only them. Genano Ltd is responsible only for the warranty stated here. 5. LIMITATIONS OF WARRANTY...
Page 14
• by service, repairs or alterations in structure performed by other than authorized repair service • or by placement of the unit against operating instructions or otherwise incor- rectly. The warranty does not include repairing damage that has no effect on the func- tionality of the product.
Always follow the operational instructions when using this Genano unit. Do not use expansions or supplies not recommended or used by Genano Ltd. Manufacturer: Genano Ltd Manual last revised 1.7.2016.
Page 16
Contact us Genano Ltd Metsänneidonkuja 6 02130 Espoo Finland info@genano.com...
Need help?
Do you have a question about the 4500 and is the answer not in the manual?
Questions and answers