Related Manuals for Genano 350
Summary of Contents for Genano 350
- Page 1 G350-UserManual-EN-revA-ver1 Genano 350 Air purification device User Manual 1(12) For product support contact: info@genano.com...
-
Page 2: Delivery Contents
See figure 1 for laboratory test results of performance. Genano 350 is designed especially for the air purification needs of small rooms and office. If you start the product for the first time in a room, it is recommended to use the highest fan speed for a short period, then lower the speed for continuous use. -
Page 3: Technical Specification
At highest fan speed: Particle size: 5.0 µm 1.0 µm 0.5 µm 0.3 µm SPCE: 98 % 98 % 93 % 86 % Figure 1. Genano 350 SPCE for various types of air contaminants 3(12) For product support contact: info@genano.com... - Page 4 The product has maintainable parts inside. For maintenance operations obey carefully the maintenance instructions given in this user manual. ǃ For ensuring product’s performance and safety, use only original materials and components validated and provided by the manufacturer, Genano Oy, Finland. 4(12) For product support contact: info@genano.com...
-
Page 5: Installation
In order to prevent product’s movement on the floor, or falling down on either side, the chassis mechanics can be locked to a wall bracket. Wall bracket installation (optional accessory) Wall mounting bracket enables installation on wall. See the instructions delivered with the wall bracket. 5(12) For product support contact: info@genano.com... -
Page 6: Operational Use
Five (5) indication LEDs for ten (10) speed levels Fan speed down Figure 2. Genano 350 control panel buttons and indication LEDs. 1) Turn on the product by pressing sharply the “Power On” button. 2) Adjust the air volume by pressing repeatedly the fan speed arrows. If you start the product for the first time in a room, it is recommended to use the highest fan speed for a short period, then lower the speed for continuous use. -
Page 7: Maintenance
230 Vac / 50Hz wall socket and waiting for at least two (2) minutes. As the power cord is re-connected, the Genano 350 is returned to power off status. The product operation can be re-started by pressing the “Power on” button. - Page 8 Figure 3. Air collector cover and allen/hex screws for opening the upper chamber. 3. Remove the upper cover. See figure 3. 4. Remove the air collector. See figure 4. Figure 4. Removal of air collector. 8(12) For product support contact: info@genano.com...
- Page 9 7. The removed air collector can be disposed as household waste. 8. Service ǃ The product has serviceable parts inside. Only trained operators shall open the chassis mechanics for service operations. Refer separate Service Instruction. 9(12) For product support contact: info@genano.com...
-
Page 10: Product Storage
3) The product does not remove odours; The air collector has saturated and is no longer able to absorb gaseous particles. Replace the air collector with a fresh one. See Maintenance operations above. 10(12) For product support contact: info@genano.com... - Page 11 G350-UserManual-EN-revA-ver1 End-of-Life instructions for disposal Genano 350 product shall be recycled by dismantling the product and sorting the components into following categories (refer to figure 6 below): 1) Product chassis and electronics base plate shall be recycled as aluminium (Al) parts.
- Page 12 G350-UserManual-EN-revA-ver1 Compliance with legal requirements Genano 350 product complies with following standards: • IEC 60335-1 Household and similar electrical appliance – Safety – Part 1: General requirements • IEC 60335-2-65 Household and similar electrical appliance – Safety – Part 65: Particular requirements for air-cleaning appliances •...
Need help?
Do you have a question about the 350 and is the answer not in the manual?
Questions and answers