Subscribe to Our Youtube Channel
Related Manuals for Genano 360
Summary of Contents for Genano 360
- Page 1 G360-UserManual-EN-revA-ver1 Genano 360 Air Decontamination Unit User Manual 1(10) For product support contact: info@genano.com...
- Page 2 The product outlet provides you clean indoor air without particles or gaseous contaminants. Genano 360 is designed especially for the air purification needs of office, various types of laboratories and cleanrooms.
-
Page 3: Delivery Contents
G360-UserManual-EN-revA-ver1 2. Delivery contents Product package contains the Genano 360 product with power cord suitable for local AC grid supply socket. You may have optioned a wall bracket or insect screen. Their installation is instructed in separate documents. 3. Disposal of delivery package Consumer package of this product is made of recyclable carton and cellulose materials. - Page 4 ǃ For ensuring product’s performance and safety, use only original materials and components validated and provided by the manufacturer, Genano Oy, Finland. ǃ The product shall be used only as the User Manual instructs. Improper use of the product may impair the protection provided by the product design.
-
Page 5: Lifting And Carrying
Use only AC power cord rated 220-240 Vac and with ground (PE) connection. Wire diameter >1.5 mm ǃ Do not position the product so that it is difficult to operate if disconnection is necessary. 5(10) For product support contact: info@genano.com... -
Page 6: Operational Use
In order to prevent damage press membrane buttons with fingers. Alarm Function ”ok” Panel lock ”on” Power on/off Fan speed up Five (5) indication LEDs for ten (10) speed levels Fan speed down Figure 2. Genano 360 control panel buttons and indication LEDs. 6(10) For product support contact: info@genano.com... - Page 7 (2) minutes. As the power cord is re-connected, the Genano 360 is returned to power off status. The product operation can be re-started by pressing the “Power on” button.
-
Page 8: Maintenance
G360-UserManual-EN-revA-ver1 8. Maintenance Caution! Risk of electric shock. Only Genano company authorized personnel may perform the maintenance operations. For maintenance contact the local Genano representative. ǃ The product has high voltage parts inside. Only Service Personnel authorized by the manufacturer may perform tasks that require opening the product. -
Page 9: Product Storage
Only Service Personnel authorized by the manufacturer may perform tasks instructed here As a service operation the Genano 360 air decontamination unit requires cleaning of the collector tube at least once a year. For cleaning the collector tube the product shall be dismantled for the cleaning. - Page 10 G360-UserManual-EN-revA-ver1 End-of-Life instructions for disposal Genano 360 product shall be recycled by dismantling the product and sorting the components into following categories (refer to figure 6 below): 1) Product chassis and electronics base plate shall be recycled as aluminium (Al) parts.
Need help?
Do you have a question about the 360 and is the answer not in the manual?
Questions and answers