Table of Contents
Advertisement
The VKM/VKMz fan (Fig. 4-5) consists of the casing 1, the electric motor attached to the inner fixing
bracket 4, the cover 2 that is fixed to the casing with screws 3 (the casing spigot diameter and the cover
diameter are equal to the connected air duct diameter), the terminal box 5 that incorporates a terminal block
and a capacitor and enables connection of the fan to single-phase power mains.
The fan models with a temperature and speed controller (Fig. 5) are equipped with a speed control knob
9, a thermostat control knob 10, a fan on/off LED light indicator 11 and a thermostat LED light indicator 12
that are located on the terminal box cover.
The fan models with the speed controller (Fig. 5) are equipped with a speed control knob 9 which is
located on the terminal box 5 cover.
The fan models with a speed controller or with a speed and temperature controller are connected to
power mains through a power cable with a plug.
VKM 100-125 E
4
3
2
5
Fig. 4
1 - casing
2 - cover
3 - screws
4 - inner fixing bracket with
an electric motor attached to it
5 - terminal box
The VC-VK fan (Fig. 6) consists of the casing 1 with the electric motor and impeller 4 fixed on the fixing
bracket 2.
The fixing bracket is attached to the casing with four screws 3.
The terminal box 5 is located on lower part of the casing on intake spigot side to facilitate connection of the
fan to single-phase power mains and placement of the capacitor.
3
2
V05EN-07.indd 11
DESIGN AND OPERATING LOGIC
6
7
1
6 - outer fixing bracket
7 - screws
8 - bolt
9 - fan speed control knob
10 - thermostat control knob
11 - fan on/off LED light indicator
12 - thermostat LED light indicator
1
5
4
Fig. 6
VKM/VKMz 100 - 315
VKM Un / VKMz Un
9
11 12
10
VKM P / VKMz P
9
8
7
6
Fig. 5
1 - casing
2 - fixing bracket
3 - screws
4 - impeller with an electric motor
5 - terminal box
5
1
3
2
4
11
28.04.2016 16:22:24
Advertisement
Table of Contents
