Vents VKM User Manual page 12

The VC-VN/VCz-VN fan (Fig. 7) consists of the casing 1. The electric motor and the impeller 3 are mounted
inside the casing using the fixing bracket 2. The casing is attached to the base plate with screws 5.
The terminal box 4 is located on top of the casing on intake spigot side to facilitate connection of the fan to
single-phase power mains and placement of the capacitor.
The VC-PN fan (Fig. 8) consists of the casing 1 with the electric motor and impeller 5 attached to the
fixing bracket 2.
The fixing bracket is attached to the casing with four screws 3.
The terminal box 6 is located on top of the casing on intake spigot side to facilitate connection of the fan
to single-phase power mains and placement of the capacitor.
4
The VC-PK fan (Fig. 9) consists of the casing 1 with the electric motor and impeller 3 attached to the
fixing bracket 2 inside.
The fixing bracket 2 is attached to the casing with four screws 5.
The exhaust outlet of the fan is covered with a grille.
The terminal box 4 is located on top of the casing on intake spigot side to facilitate connection of the fan
to single phase power mains and placement of the capacitor.
12
V05EN-07.indd 12
4
3
1 - casing
2 - fixing bracket
3 - impeller with an electric motor
4 - terminal box
5 - screws
5
2
1
Fig. 7
3 6
1 - casing
2 - fixing bracket
3 - screws
4 - base plate
5 - impeller with an electric motor
6 - terminal box
5
2
1
Fig. 8
1 - casing
2 - fixing bracket
3 - impeller with an electric motor
4 - terminal box
5 - screws
6 - base plate
Fig. 9
www.ventilation-system.com
28.04.2016 16:22:24