Safety Instructions - Epson Stylus pro 4000 Setup Manual

Safety Instructions

Read all of these instructions before using your
printer. Also be sure to follow all warnings and
instructions marked on the printer.
Warning, Cautions, and Notes
w Warnings must be followed carefully to avoid
bodily injury.
c Cautions must be observed to avoid damage to
your equipment.
Notes contain important information and useful tips
on the operation of your printer.
When choosing a place for this product
❏ Place this product on a flat, stable surface that
is larger than this product. This product will
not operate properly if it is tilted or at an angle.
40 cm
or more
15 cm
or more
❏ Avoid places subject to rapid changes in
temperature and humidity. Also keep it away
from direct sunlight, strong light, or heat
sources.
❏ Avoid places subject to shocks and vibrations.
❏ Keep this product away from dusty areas.
❏ Place this product near a wall outlet where the
plug can be easily unplugged.
❏ If you use a stand, the stand has to support at
least 50 kg (110.3 lb).
15 cm
or more
35 cm
or more
When setting up this product
❏ Use only the type of power source indicated
on this product's label.
❏ Use only the power cord that comes with this
product. Use of another cord may result in fire
or electric shock.
❏ This product's power cord is for use with this
product only. Use with other equipment may
result in fire or electric shock.
❏ Do not use a damaged or frayed power cord.
❏ If you use an extension cord with this product,
make sure the total ampere rating of the
devices plugged into the extension cord does
not exceed the cord's ampere rating. Also,
make sure the total ampere rating of all
devices plugged into the wall outlet does not
exceed the wall outlet's ampere rating.
❏ Do not block or cover the openings in this
product's cabinet.
When using this product
❏ Do not put your hand inside this product or
touch the ink cartridges during printing.
❏ Do not move the print head by hand;
otherwise you may damage this product.
❏ Do not insert objects through the slots. Take
care not to spill liquid on this product.
❏ Do not attempt to service this product
yourself.
❏ Unplug this product and refer servicing to
qualified service personnel under the
following conditions:
The power cord or plug is damaged; liquid has
entered this product; this product has been
dropped or the cabinet damaged; this product
does not operate normally or exhibits a
distinct change in performance.
3