Connecting The Printer With Your Computer - Epson Stylus pro 4000 Setup Manual

7. Adjust the paper guide and edge guide
according to the paper size.
8. Put the paper guide roller down, and attach
the paper tray cover back.
Note:
Make sure that roll paper support is not raised.
9. Press the Paper Source
Sheet
on the LCD.
Connecting the Printer with Your
Computer
The available interface varies according to
® ®
Microsoft Windows OS or Apple
system version as follows:
USB interface:
Windows XP, Me, 98, and 2000
Mac OS 8.6 to 9.x
Mac OS X
IEEE1394 interface:
Windows XP, Me and 2000
Mac OS 8.6 to 9.x
Mac OS X
button to select
® ®
Macintosh
Ethernet interface (Option):
Windows XP, Me, 98, 2000, NT4.0
Mac OS 8.6 to 9.x
Mac OS X
Using the built-in USB interface
To connect the printer to a USB port, you need a
standard shielded USB cable. To connect the
printer to your computer using the built-in USB
interface, follow these steps.
Note:
When using an inappropriate cable or connecting
peripheral devices between the printer and the
computer, the connection may be unstable.
1. Make sure that both the printer and the
computer are off.
2. Plug the USB interface cable to the printer.
Note:
When the cable has a grounding wire, secure the
wire with the screw below the connector.
3. Plug the other end of the cable into the
computer' s USB interface connector.
USB interface connector
11