Table of Contents
Advertisement
Technical
Specifications
1.
Standard Test Conditions
All tests shall be performed under the following conditions, unless otherwise specified.
1.1
Ambient light
1.2
Viewing distance
1.3
Warm up time
1.4
PDP Panel facing
1.5
Measuring Equipment :
1.6
Magnetic field
1.7
Control settings
1.8
Power input
1.9
Ambient temperature :
1.10 Display mode
1.11 Other conditions
1.11.1
1.11.2
:
150ux (When measuring I
≦0.1Cd/m
:
50cm in front of PDP
:
30 minutes
:
no restricted
PC, Chroma 2225 signal generator (with Chroma digital
additional card) or equivalent, Minolta CA100 photometer
:
no restricted
:
Brightness, Contrast, Tint, Color set at Center(50)
:
110~120Vac,60Hz
20°C ± 5°C (68°F ± 9°F)
:
31.5KHz/60Hz (Resolution 852 x 480)
:
With image sticking protection of PDP module, the luminance will descend
by time on a same still screen and rapidly go down in 5 minutes. When
measuring the color tracking and luminance of a same still screen, be sure
to accomplish the measurement in one minute to ensure its accuracy.
Due to the structure of PDP, the extra-high-bright same screen should not
hold over 5 minutes for fear of branding on the panel.
PDP4210EA
, the ambient luminance
B
2
)
CONTINUATION PAGE
2
10
NUMBER
OF
PAGES
- Quick Links:
- DVI Input
Hide quick links:
Advertisement
Table of Contents
