Table of Contents
Advertisement
Available languages
Available languages
.
English
•
Do not use accessories which are not
specifically designed and recommended
by the manufacturer. Risk of personal
injury.
•
Inspect the machine and the accessories
before each use. Do not use accessories
which are bent, cracked, or otherwise
damaged. If the machine or one of the
accessories is dropped, inspect the
machine or the accessory for damage. If
necessary, replace the accessory.
•
Only use accessories that are recom-
mended by the manufacturer.
•
Only use accessories that are suitable for
the application.
•
Only use accessories with the correct
dimensions.
•
Do not use accessories that require liquid
coolants. Risk of electric shock.
•
Make sure that the accessories are prop-
erly mounted. Do not use adapters or
other aids to mount accessories with
another spindle diameter.
•
Make sure that the maximum speed for
the accessory is larger than or the same
as the maximum speed of the machine.
Refer to the rating plate on the machine.
•
Let the machine run at no load in a safe
area after mounting the accessories. If the
machine vibrates strongly, immediately
switch off the machine, remove the mains
plug from the mains, and try to solve the
problem.
•
Make sure that the work piece is properly
supported or fixed.
•
Wear safety goggles. Wear hearing pro-
tection. Wear a dust mask. If necessary,
use other protective means, such as
safety gloves, safety shoes, etc. Risk of
personal injury.
•
Keep bystanders away from the work
area. Make sure that all persons in the
work area wear protective equipment. Risk
of personal injury.
•
Keep the mains cable away from the rotat-
ing accessory. If the mains cable touches
the rotating accessory, your hands or
arms may come in contact with the acces-
sory. Risk of personal injury.
16
7062387_Multitool_300W_Ma_#1510-01.indd 16
•
Hold the machine by the insulated gripping
surfaces where the accessory may con-
tact hidden wiring or the mains cable. If
the accessory contacts a 'live' wire, the
exposed metal parts of the machine can
also become 'live'. Risk of electric shock.
•
Do not use the machine while carrying it at
your side. Risk of personal injury.
•
Do not use the machine near flammable
materials. Risk of fire.
•
Beware that the accessory continues to
rotate for a short period after switching off
the machine. Do not attempt to bring the
accessory to a standstill yourself.
•
Never put the machine down on a table or
a workbench before it has been switched
off.
•
Regularly clean the ventilation slots. Risk
of electric shock.
ELECTRICAL SAFETY
Always check that the voltage of the power
supply corresponds to the voltage on the rat-
ing plate.
•
Do not use the machine if the mains cable
or the mains plug is damaged.
•
Only use extension cables that are suita-
ble for the power rating of the machine
with a minimum thickness of 1.5 mm
you use an extension cable reel, always
fully unroll the cable.
VIBRATION LEVEL
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardized test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment
of exposure to vibration when using the tool for
the applications mentioned.
•
using the tool for different applications, or
with different or poorly maintained acces-
sories, may significantly increase the
exposure level.
•
the times when the tool is switched off or
when it is running but not actually doing
the job, may significantly reduce the expo-
sure level.
. If
2
15-06-16 12:13
Advertisement
Table of Contents
