Software, Configuration, Databases, And Xm Activation; Configuration Mode; Software/Audio Data Identification - Garmin G300 Installation Manual

8

Software, Configuration, Databases, and XM Activation

8.1

Configuration Mode

Some software loading and all configuration settings are performed in the configuration mode. To enter
configuration mode, hold down the left-hand softkey while powering on the GDU 37X. In a two-display
system hold down the left-hand softkey on the PFD while powering on the unit.
8.2

Software/Audio Data Identification

8.2.1 LRU Software Version Identification
Do the following steps to verify the unit's current software version(s):
1. Turn on the unit in configuration mode.
2. Use the FMS Joystick to select the CONFIG MAIN page (if needed).
3. Note the displayed software version.
G300 Installation Manual – Software, Configuration, Databases ,and XM Activation
190-00921-01
Page 8-1
Revision A