One-Touch Dialer; Storing A Phone Number In The Direct Button - Panasonic KX-TG2553CS Operating Instructions Manual

One-Touch Dialer

You can store a phone number in the
stored number is dialed with a one-touch operation.

Storing a Phone Number in the DIRECT Button

Make sure the handset is in the standby mode initially.
1 Press
(FUNCTION/EXIT/CH)
2 Press or
Ö
points to "Program".
3 Press
FWD/EDIT á
4 While the arrow points to "Save
DIRECT#", press
5 Enter a phone number, up to 22 digits.
•Each time you press (CLEAR) the digit to the
left of the cursor is erased. To erase all digits,
press and hold (CLEAR).
•To move the cursor, press BACK Ü or
FWD/EDIT á.
Press (Next key).
6
Ö
•If you want to edit the entered number, press
Ñ (Edit key) and return to step 5.
7 Press
FWD/EDIT á
•A beep sounds.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
•If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number in step 5. This counts as one digit (p. 44).
.
repeatedly until the arrow
Ñ
(Yes key).
FWD/EDIT á
(Save key).
button of the handset. The
(DIRECT)
H
Program
GF
H
GF
(Yes key).
IH
1234567890123456
789012
IH
1234567890123456
789012
F
=Edit
1234567890123456
789012
Save DIRECT#
H
=Yes
Save DIRECT#
Set flash time
H
=Yes
G
=Next
G
=Next
H
=Save
31