Table of Contents
Advertisement
Programmable Functions
You can program the following function items using the handset near
the base unit.
Make sure the unit is in the standby mode.
≥You can exit the programming mode at any time by pressing (OFF).
≥If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
Display Language
You can select ENGLISH, SPANISH or FRENCH as the display
language. Your phone comes from the factory set to ENGLISH. If you
want to select the other language, program as follows:
(CH/FUNCTION)
1
Press
≥The current setting is displayed.
2
Select "ENG" (ENGLISH), "ESP" (SPANISH)
or "FRA" (FRENCH) by using
(EDIT)
3
Press
to save.
≥A beep sounds.
≥The handset will return to the standby mode.
Dialing Mode
If you have touch tone service, set to TONE. If rotary or pulse service is
used, set to PULSE. Your phone comes from the factory set to TONE.
(CH/FUNCTION)
1
Press
≥The current setting is displayed.
2
Select "PULSE" or "TONE" by using
(‹)
.
(EDIT)
3
Press
to save.
≥A beep sounds.
≥The handset will return to the standby mode.
10
.
(›)
(‹)
or
.
twice.
(›)
or
LANGUAGE: ENG
e.g. FRENCH is selected.
LANGUE: FRA
DIAL MODE: TONE
DIAL MODE:PULSE
Advertisement
Table of Contents
