The Simeas Par Software - Siemens 7KG6000-8AA Operating Instructions Manual

1.19 The SIMEAS PAR software

"SIMEAS PAR" is a program used on a PC under the operating
system WINDOWS 3.1, 3.11, or 95. It is used for reading
parameters and measured values from the transducer, for
configuring the device, or to carry out calibration.
The program is delivered on a 3½" floppy disk. For installation on
the PC, WINDOWS must be running. Insert the disk in the
corresponding drive (A: or B:) and type command
a:setup or b:setup
in the run dialog for the active drive. The installation procedure is
then carried out automatically. The user can choose the language
in which the program and the help texts are installed.
Furthermore, the suggested directory name "SIMEAS" for storing
the program and its files can be either accepted or modified.
Operator instructions are included in the program under the menu
item Help. They can also be opened by double-clicking on file
SIMEAS.HLP in the subdirectory PAR in the File Manager.
34 SIMEAS E50417-K109U-C322-A1