Security Function
1.5 Cancelling Security Setting
1.5.1 Setting Method
Overview
Clears all password settings, upload protection settings and encryption keywords, and
reverts them to the factory defaults.
PROCEDURE
1. Select "Tools" > "PLC Security Settings" > "Forcibly Disable Security" in
the menu bar.
The following confirmation message is displayed.
2. Press the [Yes] button.
A message indicating that the settings have been reverted to the factory defaults
is displayed.
NOTE
Performing the above operation erases not only the security setting
information but also all project information. Confirm if there is no problem
erasing all the information before performing the operation.
1-22