Cancelling Upload Protection Setting - Panasonic fp7 User Manual

1.3.3 Cancelling Upload Protection Setting

 Overview
 The upload protection setting can be cancelled by the following procedure.
PROCEDURE
1. Select "Tools" > "PLC Security Settings" > "Disable Uploading" in the menu
bar.
The "Disable Uploading" dialog box is displayed.
2. Select "Forcibly cancel the uploading disable state", and press the
[Execute] button.
The following confirmation message is displayed.
3. After confirming the message, press the [Yes] button.
A message indicating that the settings have been reverted to the factory defaults
is displayed.
NOTE

Performing the above operation erases not only the security setting
information but also all project information. Confirm if there is no problem
erasing all the information before performing the operation.
1.3 Upload Protection Setting
1-15