Stihl FS 300 Instruction Manual page 10

Hide thumbs Also See for FS 300:
Table of Contents

Advertisement

Available languages

Available languages

English
stop switch is on STOP or 0 since there
is otherwise a risk of fire from
uncontained sparking.
To reduce the risk of fire, do not service
or store your machine near open flames.
Check the fuel filler cap for leaks at
regular intervals.
Use only a spark plug of the type
approved by STIHL and make sure it is
in good condition – see "Specifications".
Inspect the ignition lead (insulation in
good condition, secure connection).
Check the condition of the muffler.
To reduce the risk of fire and damage
to hearing, do not operate your
machine if the muffler is damaged or
missing.
Do not touch a hot muffler since burn
injury will result.
Vibration behavior is influenced by the
condition of the AV elements – check the
AV elements at regular intervals.
Maintenance, replacement, or repair
of the emission control devices and
systems may be performed by any
nonroad engine repair establishment
or individual. However, if you make a
warranty claim for a component
which has not been serviced or
maintained properly or if
nonapproved replacement parts were
used, STIHL may deny coverage.
For any maintenance please refer to the
maintenance chart and to the warranty
statement near the end of the instruction
manual.
8
Symbols on Deflectors
An arrow on the deflector shows the
correct direction of rotation of the cutting
attachments.
Use deflector in
combination with
mowing heads
only. Do not use
metal cutting
attachments.
Harness / Strap
The harness is included in the scope of
supply or available as a special
accessory.
N
Use a shoulder strap.
N
With the engine running, attach the
machine to the shoulder strap.
Grass cutting blades, brush knives
and shredder blades must always be
used in combination with a full harness.
Circular saw blades must always be
used in combination with a full harness
with a quick-release system.
Mowing Head with Nylon Lines
Nylon line achieves a soft cut for edging
and trimming around trees, fence posts,
etc. – less risk of damaging tree bark.
To reduce the risk of injury,
never use steel wire in place of
the nylon cutting line.
STIHL Polycut Mowing Head with
Polymer Blades
For mowing unobstructed edges of
meadows (without posts, fences, trees
or similar obstacles).
Check the wear limit marks!
FS 300, FS 350, FS 400, FS 450, FS 480

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

fs 450 fs 400 fs 350 fs 480

Table of Contents