Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Stihl FS 361 C-M
Summary of Contents for Stihl FS 361 C-M
- Page 1 FS 361 C-M, 411 C-M, 461 C-M 2 - 24 Instruction Manual...
-
Page 2: Table Of Contents
STIHL expressly commit themselves to a sus‐ tainable and responsible handling of natural resources. This user manual is intended to help you use your STIHL product safely and in an environmentally friendly manner over a long service life. We thank you for your confidence in us and hope you will enjoy working with your STIHL product. -
Page 3: Overview
The manual fuel pump eases engine starts. 24 Screw plug 4 Shutter The screw plug closes the filler opening for Serves to select summer or winter operating STIHL gear grease. mode. 25 Stop pin 5 Cover The stop pin blocks the shaft while a cutting Covers the spark plug. -
Page 4: Safety Precautions
English 4 Safety Precautions Icons Meanings of symbols that may be on the trimmer and the deflector: This icon denotes the fuel tank. This symbol denotes the manual fuel pump. Shutter is in winter mode in this position. Shutter is in summer mode in this position. Engine is operated or started with the choke control in this position. - Page 5 Do not use this deflector for circular saw blades. Do nit use this deflector for brush kni‐ ves. Intended Use The STIHL FS 361, FS 411 and FS 461 brush‐ Do not use this deflector for shredder cutters are designed for the following applica‐ blades. tions: –...
- Page 6 – The user must not be under the influ‐ ence of alcohol, medication or drugs. ► Wear long trousers made from resistant ► If you have any queries: Contact a STIHL material. servicing dealer for assistance. ■ When mounting and dismounting the cutting ■...
- Page 7 ► Work only with an undamaged brushcutter. ► If fuel is leaking from the trimmer: Do not ■ If they are in an unsafe condition, parts of the use the trimmer and contact a STIHL dealer mowing head or mowing lines may come off for assistance.
- Page 8 – If a metal cutting attachment not manufactured spray when the fuel tank cap is opened. The by STIHL is used, it must not be heavier, escaping fuel can ignite. This may result in thicker, of a different shape, of a lower quality, serious injury to the user.
- Page 9 ► Stop work and consult a STIHL servicing ► Keep calm and plan your work. dealer. ► If light and visibility are poor: Do not use ■...
- Page 10 English 4 Safety Precautions ► Take breaks. ► Hold the trimmer firmly with both hands. ► If signs of a circulatory disturbance occur: ► Use the working techniques described in Consult a doctor. this instruction manual. ■ If the cutting attachment makes contact with a ►...
-
Page 11: Preparing Trimmer For Operation
► Do not attempt to service or repair the trim‐ mer or deflector. ► If the trimmer or the deflector require servic‐ ing or repairs: Contact your STIHL servicing dealer for assistance. ► Maintain the cutting attachment as descri‐ bed in the User Manual supplied with the ►... - Page 12 English 6 Assembling the Trimmer ► Remove the stop pin (4). ► Fit the nut (7). ► Insert and tighten down the screw (6) firmly. 6.3.2 Removing the Mowing Head ► Shut off the engine. It is not necessary to remove the bike handle ►...
-
Page 13: Adjusting Trimmer For User
7 Adjusting Trimmer for User English ► Unscrew the mounting nut clockwise. ► Fit the nut (1) counterclockwise and tighten it ► Remove the fastening parts, metal cutting tool down firmly. and pressure plate. ► Remove the stop pin (7). ►... -
Page 14: Mixing Fuel And Refueling The Brushcutter
► Do not top up with fuel stored for more than STIHL recommends you use STIHL MotoMix. 30 days (STIHL MotoMix: 5 years). If you mix the fuel yourself, use only STIHL two- ► When topping up, ensure that no fuel is spil‐ stroke engine oil or another high-performance... -
Page 15: Starting And Stopping The Engine
► If the trigger can be pulled: Do not use your ► Pull the starter grip slowly with your right hand trimmer and contact your STIHL dealer for until you feel it engage. assistance. ► Pull the starter grip quickly and allow the The throttle trigger lockout is defective. -
Page 16: Operating The Trimmer
When working at temperatures below -10°C or in not spring back to the idle position: Do not use powder or drifting snow, a cover plate must also your trimmer and contact your STIHL dealer be fitted to the engine housing and an air filter for assistance. - Page 17 Mowing with a mowing head (A) ► If the engine stops repeatedly: Do not use ► Swing the brushcutter steadily back and forth your trimmer and contact your STIHL servicing in an arc. dealer for assistance. ► Move forward slowly in a controlled manner.
-
Page 18: After Finishing Work
English 12 After Finishing Work ► Dip the metal cutting attachment into the Automatic feed will not take place if the mowing thicket from above. lines are shorter than 40 mm. ► Do not lift metal cutting tool above waist ►... -
Page 19: Cleaning
► Remove the cutting attachment. Monthly ► Open the fuel tank cap. ► Have the fuel tank cleaned by a STIHL dealer. ► Drain the fuel tank. ► Have the pickup body in the fuel tank cleaned ► Close the fuel tank. - Page 20 Throttle cable is not ► Adjust the throttle cable. correctly adjusted. The engine switches The pickup body is ► Contact a STIHL servicing dealer. off although there is not located in the still fuel in the fuel right place. tank.
-
Page 21: Specifications
19 Specifications is 2 dB(A). The K-value for vibration level is 2 m/s². 19.1 STIHL FS 361 C-M Brushcutter Using with a mowing head – Displacement: 37.7 cm³ FS 361 C-M – Engine power according to ISO 8893: 1.7 kW –... -
Page 22: Combinations Of Cutting Attachments, Deflectors And Carrying Systems
– Full harness with – DuroCut 40-4 mowing head quick release sys‐ – PolyCut 48-2 mowing head (only for FS 361 C-M) – SuperCut 40-2 mowing head – TrimCut C 42-2 mowing head – Grass cutting blade 230-4 – Deflector for metal cutting attachments (230 mm dia.) -
Page 23: Spare Parts And Accessories
D-71336 Waiblingen – Category: Brushcutter Germany – Manufacturer's brand: STIHL – Type: FS 361 C-M, FS 411 C-M, FS 461 C-M declare under our sole responsibility that – Serial number: 4147 – Category: Brushcutter – Manufacturer's brand: STIHL conforms to the relevant provisions of Directives –... - Page 24 – Measured sound power level: 113 dB(A) – Guaranteed sound power level: 115 dB(A) The technical documents are stored at ANDREAS STIHL AG & Co. KG. The year of manufacture, country of manufacture and serial number are specified on the rating plate of the brushcutter.
- Page 25 24 UKCA Declaration of Conformity English 0458-838-0101-A...
- Page 26 English 24 UKCA Declaration of Conformity 0458-838-0101-A...
- Page 27 24 UKCA Declaration of Conformity English 0458-838-0101-A...
- Page 28 *04588380101A* 0458-838-0101-A...