Setting And Using Alarms - iHome iH402 Instruction Manual

This unit has two independent alarms, Alarm 1 and Alarm 2. Each is set and operates in the same
way. Instructions below show Alarm 1. Follow the same method to set Alarm 2.
1
2
Press and release the – or + Set Button to adjust the clock to the desired alarm time (press and
hold for rapid adjustment). NOTE: Make sure to set the correct AM or PM time. AM/PM
indicators appear just below the time display.
3
Press and release the Alarm 1 Button to complete setting Alarm 1. 2 beeps confirm alarm is armed.

Setting and Using Alarms

2 SECS
OR
8
Press and hold the Alarm 1 Button
until current alarm time flashes on the
display and a beep sounds.