Icom ip100h Quick Manual page 11

2. Enter Group 1 in the Name (No.:) field.
3. Ensure Call Type is set to Group.
4. Enter 0001 as Destination ID and click Apply tab.
5. Enter Roger (example) for Name below No.: 2.
6. Select Individual as the Call Type.
7. Enter 0001 as Destination ID and click Apply.
All other Groups and Radios information should be entered into the IP1000C controller in a
similar way.
8. After adding all Groups and Radio ID information, Verify that ID List Entries (setting
Number1) shows all Group and Radios ID's that you just added.
©2014 Icom America Inc.
Page 11
Icom America, Inc.
12421 Willows Road NE
Kirkland, WA 98034