How To Use Power Saving Function; Manual Method; How To Start Power Saving - Cuckoo CRP-HP06 Fuzzy Series User Manual

HOW TO USE POWER SAVING FUNCTION

what is power saving in "Standby" mode?
A little electricity is wasted if power cord is not plugged in. It is called manual way as standby electric
power. The power saving of "Standby" mode is technology which minimises electrical consumption.

Manual Method

How to start power saving

Push Set button for 3seconds at
waiting state Saving power
function is set up.
How to end power saving
Method 1) Push any button then it will be
returned to waiting mode.
Automatic Method
If the standby time is chosen as a number without "0" at the automatic power saving mode, the
automatic saving power function will be operated. If you move lid handle or push any button before
passing waiting time, the waiting time which is reduced will go back to the setting.
How to set up
What is power saving in keep warming mode
This is the function to save electricity from solenoid valve during keep warming.
How to set or cancel option
If the display of keep warming is shown on the automatic power saving mode with keep warming
button, it means to complete setting up or canceled state.
Caution
1. If is is difflcult to turn lid handle in power saving mode, turn it after completing power saving mode
with "Menu/Selection" button.
Method 2) If lid handle is turned to open or close, power saving
1. If you "Push made" button 8 times at the standby state, automatic power
saving mode is set up.
2. When automatic power saving mode is set up, it says that this is automatic
power saving mode. Press the "Set" button after selecting waiting time.
3. If you select '0'minute with "Menu/Selection" button. automatic power saving
will be canceled. After setting up waiting time you want, press the "Set" button.
4. Without pressing any button within 7seconds or pushing "Cancel" button.
Automatic power saving function will be canceled and back to waiting mode.
The condition to start power saving
1. In case of passing, established waiting time at the automatic saving
power mode.
2. In case that lid handle is located to lock.
3.In case that cook temperature after-cooking is reached to established.
The way to end power saving function
1. Press "Menu/Selestion" button or "Ser" button.
2. Locate lid handle to 'open'.
3. Plug power cord put.
mode will be canceled and back to waiting state.