Table of Contents
Advertisement
HOW TO USE POWER SAVING/
ENERGY EYE FUNCTION
What is power saving in "Standby" mode?
A little electricity is wasted if power cord is not plugged in. It is called manual way as standby electric power.
The power saving of "Standby" mode is technology which minimizes electricity consumption
Manual Method
How to start power saving
Push Cancel button for 3 seconds at
waiting state Saving power function is
set up.
How to end power saving
Method 1) Push any button then it will be
returned to waiting mode.
Method 2) If lid handle is turned to open or
close, power saving mod will be
canceled and back to waiting
state.
Automatic Method
If the standby time is chosen as number other than "0" at the automatic power saving mode, the automatic saving power
function will be operated. If you move lid handle or push any button before passing waiting time, the waiting time which is
reduced will go back to the setting.
How to set up
Energy Eye function
The luminance sensor automatically recognizes ambient brightness during standby, cooking, warming and preset
timer for minimizing power consumption of the product. If you want the power saving mode to start when it's darker
than the current level(Step 2), set the mode to Step 1. If you want the mode to start when it's brighter than the
current level, set the mode to Step 3. (The power saving mode of CUCKOO is set to Step 2 at the factory.)
(When selecting Energy Eye function)
1. Press the Mode button 13 times in standby status and you will enter the Energy Eye mode. (Please make sure
that you press the Mode button for a second or longer in the beginning.)
2. When you enter the mode, a voice comes up saying "You have entered the Energy Eye mode. Please select or
deactivate the Energy Eye mode with Selection button and press SET button." After that, Menu/Selection button
blinks and Mode, SET and Cancel buttons light.
3. Each time you press the Menu/Selection button, the Energy Eye shifts from OFF to Step 1 to Step 2 to Step 3.
When OFF is displayed, a voice comes up saying "Energy Eye function is deactivated." The Set button blinks and
Mode, Menu/Selection and Cancel buttons light.
4. After selecting your preferred step, please press the SET button. A voice will come up saying "Energy Eye setting
has been completed" and your step will be stored.
5. This mode will be cancelled if you press the "Cancel" button or after 7 seconds without pressing any button.
In this case a voice will come up saying "Time exceeded, the mode will be canceled".
1. If you push "mode" button 8 times at the standby state, automatic power saving mode is set up.
2. When automatic power saving mod is set up, it says that this is automatic power saving mod. Press
the "Set" button after selecting waiting time.
3. If you select "0" minute with "Menu/ Selection" button. Automatic saving will be canceled. After
setting up waiting time you want, press the "Set" button.
4. Without pressing any button within 7 seconds or pushing "Cancel" button. Automatic power saving
function will be canceled and back to waiting mode.
(When deactivating Energy Eye function)
Advertisement
Table of Contents
