TO KEEP COOKED RICE WARM AND TASTY
Controlling method of warming temperature
If the temperature in the oven is not proper, it smell bad and changes rice color even though it is cleaned
frequently and boiled up. Temperature needs to be set.
Press "Mode" button over
1 time during warming.
It displays as picture with
buzzer. At the time,
means current
warming temperature.
"Menu/Selection" button will blink,
and "Mode", "Set" and "Cancel"
buttons will be turned ON.
Note: The reference temperature programmed
when the product is shipped may differ from
the Instruction.
Change of temperature
If you want to change cooking temperature in the standby mode, press "Mode select" button over 2
seconds, and press it 2 more times. You can change cooking temperature.
How to operate My Mode function.
Use it while opening the lid when there is too much water or rice becomes too soft.
In standby mode, push
the "mode" button
4times.
The voice says that it is
programmed warming
mode, control the
temperature you want.
1. If too much water is spilled out when you open the lid :
2. If the edge of rice is too soft :
To raise temperature
To lower temperature
Press "Menu/Selection" button to raise the setting mode.
Press "Menu/Selection" button to reduce the setting mode.
Press "Hour/up" button to change
the temperature as
"Set" button will blink, and "Mode", "Menu/Selection"
and "Cancel " buttons will be turned ON.
To switch the functions continuously,
keep pressing the button.
After setting temperature, press
"Mode" button. Preset temperature
will be stored with buzzer sound.
(It will be cancelled once press "Cancel" button or
after 7 seconds without pressing any button.)
Press "Minute/Down" button
to change the temperature as
"Set" button will blink, and "Mode", "Menu/Selection"
and "Cancel " buttons will be turned ON.
To switch the functions continuously, keep pressing
the button.
Press "Menu/Selection" button
to change as the picture(up)
"Set" button will blink, and "Mode", "Menu/Selection"
and "Cancel " buttons will be turned ON.
To switch the functions continuously, keep pressing
the button.
Select the menu you want, then the
press the "My Mode" button and
set-up time will be automatically
entered with a buzzer.
(If you press the "Cancel" button or do not press
a button within 7 seconds, the function will be
cancelled and returned to standby mode.)
Press "Menu/choice" button
as the picture(down)
"Set" button will blink, and "Mode", "Menu/Selection"
and "Cancel " buttons will be turned ON.
To switch the functions continuously, keep pressing
the button.