How To Use Saving Power Function 30~31 60~61 - Cuckoo CRP-HL10 Fuzzy Series Operating Instructions Manual

HOW TO USE SAVING POWER FUNCTION
what is saving power of standby mode?
A little electricity is wasted if power cord is not plugged in. It is called manual way as standby electric power.
The saving power of standby mode is technology which minimises elcetricity consumption.
Manual way
The way to start saving power
Push Set button for 2seconds at waiting state saving power function is set up.
The way to end saving power
Way1) Push any button then it will be returned waiting mode.
Way2) If lid handle turn to open or close, saving power mode will be canceled and back to waiting state.
How to use automatic way
If the standby time is chosen as number without "0" at the automatic saving power mode, the automatic
saving power function will be operated.
If you move lid handle or push any button before passing waiting time, the waiting time which is reduced will
go bact to settings.
How to set up
1. If you push mode button 9times at the standby state automatic saving power
2. When automatic saving power mode is set up. it says that this is automatic saving
3. If you select '0'minute with menu/select button. automatic saving power will be
4. Without any button within 7seconds or push cancel button. Automatic saving power
mode is set up.
power mode. Press the "Set" button after selecting waiting time.
canceled. After setting up waiting time you want, press the "Set" button
function will be canceled and so back to waiting mode